How To Enable Wi-Fi

To connect to your MEATER Block or to use MEATER Link, you’ll first have to enable Wi-Fi on your device. Here’s how:

iOS Devices:

iOS 11 And Under

To enable Wi-Fi, slide your finger up from the bottom of the screen to access the quick settings menu. From here, Wi-Fi can be turned on by tapping on the Wi-Fi icon, shown here:

iOS 12 And Above

To enable Wi-Fi, slide your finger down from the top right corner of the screen to access the quick settings menu. From here, Wi-Fi can be turned on by tapping on the Wi-Fi icon, shown here:

Once Wi-Fi is enabled you should be able to pair your MEATER Block by following the instructions in the app.

For Android:

Each Android phone will have a slightly different method for accessing the Wi-Fi settings. Usually, you should be able to find the Wi-Fi settings by sliding your finger down from the top of the screen to access the quick settings menu. From here, Wi-Fi can be turned on by tapping on the Wi-Fi icon, shown here:

If you cannot see Wi-Fi settings in the drop down bar at the top, navigate to your device settings. There will be a Wi-Fi section under the general device settings.

If you need any further assistance please use the link below to utilise our MEATER support wizard.