Your comprehensive support guide to your MEATER Pro XL.
- Standalone Mode: Cook without the use of your smartphone.
-
Longer Range:
- Charging Dock to WiFi Range: Equivalent to your home WiFi signal's range
- Probe-to-Charging Dock Range (Standalone Mode): Each probe provides 33ft/10m range from probe to the dpcl when used in open air, gas grills, ovens, and rotisseries. The range may be reduced heavily when used in smokers and kettle grills.
- 4 Probes: Each probe is equipped with four internal temperature sensors and one ambient sensor, which can simultaneously monitor internal meat temperatures up to 105°C (221°F) and ambient cooking temperatures up to 550°C (1000°F).
- Guided Cook System: Walks you through every step of the cooking process to guarantee perfect and consistent results. You can also set up custom alerts/notifications based on temperature and/or time.
- Advanced Estimator Algorithm: Estimates how long to cook and rest your food to help plan your meal and manage your time.
Documentation
Owner's Manual & Safety Information
Useful Resources for your MEATER Pro XL
Connecting your MEATER Block
Cooking Resources
Connectivity / Range
Specs
Understanding MEATER Pro XL Probes
MEATER Pro XL features the same advanced probes as MEATER Pro. Each probe is equipped with five internal sensors strategically positioned between the pointed tip and the safety notch, ensuring precise temperature measurements.
Utilizing the Probes with the MEATER App
When you're cooking, simply tap on the internal temperature reading in the MEATER app to view the detailed temperatures reported by each sensor. This feature allows you to monitor your cooking process with exceptional accuracy.
Probe Calibration: The probes are professionally calibrated and are designed to maintain its accuracy over time. No recalibration is necessary.
Probe-Charger Compatibility
MEATER Pro XL probes can only be used with the MEATER Pro XL charger. These probes may not be used interchangeably with any other units.
MEATER Pro XL pairs with the MEATER app and will not pair with the Traeger app, nor will it pair with the Traeger grill.
Power Source
MEATER Pro XL is powered by an internal lithium battery, which can be conveniently charged using the included USB-C cable.
Using a Charging Adapter: MEATER Pro XL draws 3.5W. When using a charging adapter, we recommend using one with a minimum of 5W. Using a power adapter with a higher wattage may be used as the charging block will draw only what it needs.
Safety & Care
- Do not use in a microwave or pressure cooker.
- Do not drop on a hard surface.
- Hand wash with soap and water before and after each use.
- MEATER Pro XL probes are top dishwasher safe.
- Make sure probes are completely dry when placed back in the charger.
- Keep it covered in bad weather conditions.
- Do not immerse the charger in water. The charger is not waterproof.
- The charger is not fireproof. Do not leave it on or near hot surfaces.
- Do not touch the probes with bare hands when removing immediately after a cook. MEATER Pro XL probes will be hot.
- Do not exceed max Temp: 221°F (105°C)/max ambient temp: 1000°F (550°C)
- When removing the MEATER probe from the meat, gently pull and twist in the same direction it was inserted. Avoid applying left/right/up/down pressure to avoid damaging the probe.
- Store in a dry, cool place.