Your comprehensive support guide to your MEATER Plus.
Introduction to MEATER Plus
- Improved range: Bluetooth booster in the MEATER Plus dock extends the range up to 165ft/50m.
- Dual sensors: Dual temperature sensors in each probe can monitor internal meat temperature up to 100°C/212°F and ambient temperature up to 275°/527°F simultaneously.
- Guided Cook System: Walks you through every step of the cooking process to guarantee perfect and consistent results. You can also set up custom alerts/notifications based on temperature and/or time.
- Advanced Estimator Algorithm: Estimates how long to cook and rest your food to help plan your meal and manage your time.
What's in the box?
Each MEATER Plus contains the following:
- x1 Charging Dock
- x1 AAA Alkaline Battery
- x1 Probe
- x1 Safety/User Manual
Documentation
Owner's Manual & Safety Information
Useful Resources for your MEATER Plus
Connecting your MEATER Plus
Cooking Resources
Connectivity / Range
Specs
Range by Appliance Type
The ranges below refer to the distance between the probe and the mobile device.
We recommend keeping the charging dock as close to the probe as possible and within line-of-sight of the probe, as the ranges specified are up to the identified distance.
-
Open Air (line of sight)
- Probe-to-dock: Up to 33ft/10m
- Dock-to-smart device: Up to 165ft/50m
- Rotisserie: Up to 165ft/50m
- Gas grill: Up to 165ft/50m
- Oven: up to 165ft/50m
- Kamado grill: up to 165ft/50m
- Kettle grill: up to 142ft/43m
-
Smoker: up to 142ft/43m
Probe Sensor Accuracy
Note: The probes are professionally calibrated by Texas Instruments and are designed to maintain its accuracy over time. No recalibration is necessary.
- The internal sensor is accurate to 1°F / .5°C
- The ambient sensor is accurate to within 31°F / 5°C
Probe-Dock Compatibility
The MEATER Plus probes are the same probes we use for the original MEATER and MEATER SE. The added range for MEATER Plus comes from a Bluetooth booster in the dock.
Safety & Care
Probe Care
-
Cleaning Instructions
- Alpha Collection probes are not designed to be dishwasher-safe.
- Make sure probes are completely dry when placed back in the dock.
- Alpha Collection probes are not designed to be dishwasher-safe.
- Do not use probes in a microwave or pressure cooker.
- Do not drop probes on a hard surface.
- MEATER Plus is not fireproof. Do not leave the probe directly on or near hot surfaces (e.g placing dock on side of grill that's being actively used).
- Do not touch with bare hands when removing immediately after a cook. MEATER probes will be hot.
- Do not exceed max temp/max ambient temp.
- Avoid applying left/right/up/down pressure on the MEATER ceramic handle when removing from the meat. Instead, pull and twist on the same horizontal axis of insertion to remove.
- Store in a dry, cool place.
Charging Dock Care
- Do not immerse the charging dock in water or other liquids.
- Do not drop dock on a hard surface.
- Keep covered in inclement weather.
- MEATER Plus is not fireproof. Do not leave the dock directly on or near hot surfaces (e.g placing dock on side of grill that's being actively used)
- Store in a dry, cool place.
- Keep MEATER Plus (especially the dock) out of direct sunlight.