This guide walks through the in-app pairing experience for your original MEATER.
For the best experience, follow along in the MEATER app.
Related Articles
Before You Get Started
- Charge your MEATER probe for at least 2 hours.
- Make sure your phone's Bluetooth is turned on.
- Download the MEATER app
A MEATER Cloud Account is required to use the MEATER App
Step 1. Add Device in the MEATER App
Open the MEATER App on your phone. On your first login, the app will prompt you to add a device. If the app doesn’t automatically prompt you to add a device, manually tap the + Add Device button.
If the customer already has a MEATER paired, tap the Initials Icon in the top-right corner of the home screen. Select My Devices and select Scan for Meater Devices on the bottom.
Step 2. Accept Safety Information
Review and accept the Safety Agreement, then continue through the educational screens about sensors, the battery tab, and charging.
Step 3. Pair the Probe
Once you reach the Pairing Screen, follow these steps:
- Remove the probe from the dock.
- Wait for pairing to complete. Keep the probe close to your device. When paired, you’ll see the “MEATER Probe Found” screen.
Step 4. Congratulations! Pairing Complete
When setup is complete, you'll see the cook dashboard. Your MEATER Original is ready to use.
First Time Cooking After Pairing
The MEATER app will prompt new users to watch three short Getting Started videos.
Each video is under 30 seconds. You may skip them, but all three must be watched before your first cook.