This shows the step-by-step process on how to pair the MEATER Pro Duo
Related Articles
How to Pair MEATER Pro Duo with the MEATER App
Pairing your MEATER Pro Duo is an easy process you can complete in just a few simple steps.
1. Charge MEATER Pro Duo
- Before starting the pairing process, make sure that the MEATER Pro Duo has been charging for at least 30 minutes. This is to prevent issues during pairing like disconnections or the device not pairing properly.
2. Download & Open the MEATER App
If you don't have the MEATER app, download it from the App Store on iPhone or the Play Store for Android. Look for the following icon:
Open the MEATER App. Tap Add Devices.
- If you already have a MEATER paired, tap the three dots in the top-right corner of the home screen. From the drop-down menu, select Add Devices. If the app doesn’t automatically prompt you to add a device, manually tap the + Add Device button.
If no other MEATER devices are in range, it will bypass the device selection screen and proceed directly to the next step.
3. Accept Safety Agreement and Review Educational Content
You will be prompted to accept the Safety Agreement before continuing. Once accepted, the app will display a few educational screens explaining temperature sensors and device charging:
4. Prepare the Unit for Pairing
Once you reach the Pairing Screen, you will need to prepare the probes for pairing.
-
Remove the Probes from the Charger: Remove both probes from the charger.
-
Wait for the Green Light: The probes need to be within range of the charger. Wait for the green light to blink. The blinking green light indicates that the probes are paired with the dock. Each light will correspond with the right or left probe, respectively.
Once the probes are ready, the app should display the "MEATER Pro Duo Found" screen.
5. Connect Unit to WiFi
Now the app will prompt you to connect your MEATER Pro Duo to your WiFi network. Ensure the following:
|
Wi-Fi Network Range: Confirm that the MEATER Pro Duo is within the range of your WiFi network to avoid connectivity issues. |
|
|
Select the Network: The app will display a list of available WiFi networks. Select your preferred network. |
|
|
Enter Wi-Fi Password: After selecting the network, the app will ask for the WiFi password. Make sure the password is entered correctly. Once you have entered your WiFi information, the app will establish the connection between the MEATER Pro Duo and the WiFi network. This may take a few moments. |
|
|
Connection Complete Screen: Once the connection is successful, the app will display a screen, confirming that the MEATER Pro Duo is successfully paired with the network and ready for use. |
5.1 Update Firmware, If Needed
If a firmware update is available, the app will prompt you to proceed with a firmware update.
- LED Behavior: Both LED lights will blink red when a firmware update is in progress.
Proceed with the update, as running the latest version helps avoid issues during setup or in the future.
Firmware Update Fails: If the app doesn’t display the connection complete screen or if the connection fails, refer to MEATER Pro Duo Not Connecting for additional steps.
6. Start Cooking!
Once all the setups are complete, you will be taken to the cook dashboard. From here, you can begin using your MEATER Pro Duo to start cooking.
First Time Cooking after Pairing
Watch MEATER Academy Videos
Once the device is paired, the app might take you to the Getting Started or the Quick Start Guide screen. You will need to watch three short videos about using the MEATER product.
Each video is under 30 seconds long. You can skip the videos, but you must watch all three before starting your first cook. If you attempt to start a cook without watching the videos, the app will prompt you to watch them first.