Pairing MEATER Plus

What's in This Article?

Check out our step-by-step guide to pair your MEATER Plus to the MEATER app.

Related Articles

How to Pair Your MEATER Plus with the MEATER App

Pairing your MEATER Plus is an easy process you can complete in just a few simple steps.

1. Charge Your MEATER Plus

Before attempting to pair, remove the white battery tab and charge your MEATER Plus for at least 2 hours. This prevents issues during pairing, such as disconnections or the device not pairing properly.

2. Download & Open the MEATER App

1 - Meater Plus Select Device.gif

  1. Download the MEATER app. Look for the MEATER iconmceclip0-removebg-preview.png.
  2. Open the MEATER App and tap Add Devices.
  3. The app will ask if there is a + sign on your charger. Select yes. This ensures you’re pairing the correct unit

3. Accept Safety Agreement and Review Educational Content

Next, you’ll be prompted to accept the Safety Agreement before continuing. Once accepted, the app will display a few educational screens explaining temperature sensors, the battery tab, and device charging:

2 -  Meater Plus Agreement.gif 3 - Meater Plus Warnings.gif

4. Pair the Unit to the Phone

Once you reach the Pairing Screen, follow these steps to pair the unit: 

  1. Remove the probe from the charging dock and wait for the LED to blink green. A blinking green LED indicates the probe is paired with the dock.
    4 - Meater Plus Pairing.gif
  2. Once the unit is paired, the app should display the "MEATER Plus Found" screen.
    5 - Meater Plus Found.gif
  3. Update firmware, if needed. If a firmware update is available, the app will prompt you to proceed with a firmware update.
    • LED Behavior: The LED light will blink red when a firmware update is in progress.
    • Proceed with the update, as running the latest version helps avoid issues during setup or in the future.
    • Firmware Update Fails: If the app doesn’t display the connection complete screen or if the connection fails, refer to MEATER Plus Not Connecting for additional steps.

5. Start Cooking!

Once setup is complete, you’ll be taken to the cook dashboard. From here, you can begin using your MEATER Plus to start cooking.

Pro Duo - Pair - Complete Congratulations.gif

 

First Time Cooking after Pairing

Watch MEATER Academy Videos

Once your device is paired, the app may take you to the Getting Started or Quick Start Guide screen. You’ll need to watch three short videos about using the MEATER product. 

Each video is under 30 seconds long. You can skip the videos, but you must watch all three before starting your first cook. If you try to start a cook without watching the videos, the app will prompt you to watch them first.

36827295145371

Was this article helpful?

20 out of 34 found this helpful