Pairing MEATER SE

What's in This Article?

This shows the step-by-step process of how to pair your MEATER SE

Related Articles

How to Pair Your MEATER SE with the MEATER App

Pairing your MEATER SE is an easy process you can complete in just a few simple steps.

1. Charge Your MEATER SE

  • Before starting the pairing process, ensure that your MEATER SE has been charging for at least 2 hours. This prevents issues during pairing, such as disconnections or the device not pairing properly.

2. Download & Open the MEATER App

If you don't have the MEATER app, download it from the App Store on iPhone or the Play Store for Android. Look for the following icon:mceclip0-removebg-preview.png

 

Open the MEATER App and tap Add Devices.

  • If you already have a MEATER paired, tap the three dots in the top-right corner of the home screen. From the drop-down menu, select Add Devices. If the app doesn’t automatically prompt you to add a device, manually tap the + Add Device button.

1 - Selecting Device.gif

 

3. Accept Safety Agreement and Review Educational Content

You will be prompted to accept the Safety Agreement before continuing. Once accepted, the app will display a few educational screens explaining temperature sensors, the battery tab, and device charging:

2 - Agreement.gif

 

4. Pair the Unit to Your Phone

Once you reach the Pairing Screen, follow these steps to pair the unit:

  • Remove the Probe from the Dock: Remove the probe from the dock.

  • Wait for the Green Light: Ensure the probe is within range of the dock. Wait for the green light to blink. The blinking green light indicates that the probe is paired with the dock.

Once the unit is paired, the app should display the "MEATER SE Found" screen.

3 - Pairing.gif 4 - SE Found.gif


4.1 Update Firmware, If Needed

If a firmware update is available, the app will prompt you to proceed with a firmware update.

  • LED Behavior: The LED light will blink red when a firmware update is in progress.

Proceed with the update, as running the latest version helps avoid issues during setup or in the future.

Firmware Update Fails: If the app doesn’t display the connection complete screen or if the connection fails, refer to MEATER SE Probe Not Connecting for additional steps.


5. Start Cooking!

Once all setups are complete, you will be taken to the cook dashboard. From here, you can begin using your MEATER SE to start cooking.

Pro Duo - Pair - Complete Congratulations.gif

 

First Time Cooking after Pairing

Watch MEATER Academy Videos

Once your device is paired, the app may take you to the Getting Started or Quick Start Guide screen. You will need to watch three short videos about using your MEATER product.

Each video is under 30 seconds long. You can skip the videos, but you must watch all three before starting your first cook. If you attempt to start a cook without watching the videos, the app will prompt you to watch them first.

36852220731547

Was this article helpful?

1 out of 3 found this helpful