This guide walks through the in-app pairing experience for your MEATER SE.
For the best experience, follow along in the MEATER app.
Related Articles
Before You Get Started
- Ensure your MEATER SE has been charging for at least 2 hours.
- Make sure your phone's Bluetooth is turned on.
- Download the MEATER app
A MEATER Cloud Account is required to use the MEATER App
Step 1. Open the MEATER App
Open the MEATER App on your phone. On your first login, the app will prompt you to add a device. If the app doesn’t automatically prompt you to add a device, manually tap the + Add Device button.
If you already have a MEATER paired, tap the three dots in the top-right corner of the home screen. From the drop-down menu, select Add Devices.
Step 2. Accept Safety Agreement and Review Educational Content
Accept the Safety Agreement to continue. The app will then display educational screens explaining temperature sensors, the battery tab, and device charging.
Step 3. Pair the Unit to Your Phone
- Remove the Probe from the Dock: Take the probe out of the dock.
- Wait for the Green Light: Ensure the probe is within range of the dock. Wait for the green light to blink, indicating the probe is paired with the dock.
Once the unit is paired, the app should display the "MEATER SE Found" screen.
Step 4. Update Firmware, If Needed
If a firmware update is available, the app will prompt you to proceed with a firmware update.
- LED Behavior: The LED light will blink red when a firmware update is in progress.
Proceeding with the update ensures your device operates smoothly and avoids issues during setup.
Firmware Update Fails: If the app doesn’t display the connection complete screen or if the connection fails, refer to MEATER SE Probe Not Connecting for additional steps.
Step 5. Start Cooking!
Once all setups are complete, you will be taken to the cook dashboard. From here, you can begin using your MEATER SE to start cooking.
First Time Cooking After Pairing
After pairing, the app may direct you to the Getting Started or Quick Start Guide screen. You will need to watch three short videos about using your MEATER product.
Each video is under 30 seconds. You may skip them, but you must watch all three before starting your first cook. The app will prompt you if you try to start a cook without completing them.